Habitech 1/4 Inch Dripline Tubing - Product Manual
- Package Contents
- Product Specifications
- Emitters and Flow Rate
- Maximum Tubing Length
- How to attach the Tubing and Fittings
- Using the Goof Plugs
- Using the 1/4" Couplings
- Attaching to a water source
- I don't see my question here
- 1/4" Tubing (100 Ft Roll, 6" Emitter Spacing)
- (Qty 5) 1/4" Couplings
- (Qty 10) Goof Plugs
Length: 100 Ft Roll of 1/4" Tubing
Compatibility: Uses standard 1/4″ barbed fittings
Outside Diameter (OD): 0.25"
Inside Diameter (ID) 0.170"
Wall thickness: 0.040″
Operating pressure range: 10 – 50 PSI
Emitters are built into the tubing every 6 inches.
- 6″ Dripper Spacing
- Emitter flow rate: 0.5 GPH at 15 PSI
- Clog-resistant flow path
19 Feet. To maintain optimal flow, use a maximum length of 19 ft of Habitech Dripline Tubing per run.
Raised garden beds, row gardens, large pots, shrubs and trees, flower beds, vegetable gardens.
Briefly apply heat to the end of the tubing with hot (not quite boiling) water, or let the tubing lay out in the sun for an hour. This will soften the tubing, and help it push onto the barbed fittings more easily.
Insert a goof plug into the end of each tubing run, to cap off the line.
Insert the 1/4" Barbed Couplings into the start of each tubing run, to connect it to your main line 1/2" tubing.
You can either attach each run of Habitech 1/4" Dripline to your main line 1/2" tubing, or if you wish to connect the 1/4" Dripline directly to a garden hose or spigot, you can use our 1/4" Irrigation Tubing Adapter.
We are here to help! For customer support, please contact us.